Figuring Out What You Need
Not sure how much to order?
If you’re unsure of what quantity of parts you should order, we can make that easier!
We’ve got specifications here for beds, crossmembers, slats, floors, and fasteners.
10’ Bed
(2 Gates Per Side and 2 Rear Gates)
3 Side Latches
4 Corner Latches
For Latches – 35 Each 5/16” X 1-1/2” Carriage Bolts, Lock Washers, Flat Washers, and Nuts
12 Stakes
12 Pockets
12 Sleeves
12’ to 14’ Bed
(3 Gates Per Side and 2 Rear Gates)
5 Side Latches
4 Corner Latches
For Latches – 45 Each 5/16” X 1-1/2” Carriage Bolts, Lock Washers, Flat Washers, and Nuts
16 Stakes
16 Pockets
16 Sleeves
16’ to 18’ Bed
(4 Gates Per Side and 2 Rear Gates)
6 Side Latches
4 Corner Latches
For Latches – 50 Each 5/16” X 1-1/2” Carriage Bolts, Lock Washers, Flat Washers, and Nuts
20 Stakes
20 Pockets
20 Sleeves
20’ to 22’ Bed
(5 Gates Per Side and 2 Rear Gates)
9 Side Latches
4 Corner Latches
For Latches – 65 Each 5/16” X 1-1/2” Carriage Bolts, Lock Washers, Flat Washers, and Nuts
24 Stakes
24 Pockets
24 Sleeves
23’ to 24’ Bed
(6 Gates Per Side and 2 Rear Gates)
11 Side Latches
4 Corner Latches
For Latches – 75 Each 5/16” X 1-1/2” Carriage Bolts, Lock Washers, Flat Washers, and Nuts
28 Stakes
28 Pockets
28 Sleeves
Crossmembers
(16″ on Center)
Length of the truck X of slats per gate to get total lineal required for sides
Width of the truck X of slats per gate to get total lineal required for rear gates
For Latches – 65 Each 5/16” X 1-1/2” Carriage Bolts, Lock Washers, Flat Washers, and Nuts
Steel and aluminum slats are sold in lengths of 48″ and 60″
Floors
95-1/2″ bed requires 13 boards wide X the length of the bed (Tongue & Groove or Shiplap)
101-1/2″ bed requires 14 boards wide X the length of the bed (Tongue & Groove or Shiplap)
Fasteners
100 pieces per box
For Slats
5/16″ x 3″ Carriage bolts, lock washers, flat washers, and nuts
2 pieces of each fastener, per slat, per stake
For Floors
2 pieces of Torx screws, per board, per crossmember
For Latches
5 each – 5/16″ x 1-1/2″ carriage bolts
5 each – 5/16″ lock washers
5 each – 5/16″ flat washers
5 each – 5/16″ hex nuts
Drill Bits
7/32” for 1/4” Torx
9/32” for 5/16” Torx
Torx Self-Tapping Floor Screws
1/4” X 1-1/2”
1/4” X 2”
1/4” X 2-1/2”
1/4” X 3”
5/16” X 2”
5/16” X 2-1/2”
5/16” X 3”
Torx Bits
T-30 for 1/4” Torx screws
T-40 for 5/16” Torx screws
Our Services
Metal Fabrication
Constructing pieces by cutting, bending, and assembling.
Custom Metal Works
Creating unique pieces tailored to your specific needs.
Custom Milling
Manufacturing parts by cutting material from raw stock.
Raw Materials
Cold rolled, hot rolled, stainless, galvanized, and diamond plate.
Lumber, Steel, Hardware, and Much More!
Galleher Industries is your one-stop-shop for lumber, steel, and more. Our always in-stock, streamlined supply chain will save you money, time, and headaches. Competitors can’t match us in supply — we stock far more than just steel and lumber.
We offer 1,000s of SKUs across dozens of product categories, including lumber, steel, aluminum, hardware, and raw materials. We also supply various metal parts and hardware for dry vans, box trucks, contractor bodies, flatbeds, stake beds, trailers, and more.
Our on-site manufacturing capabilities allow us to customize and tailor parts. We’ll even re-engineer them to make them more affordable or easier to install.
View Our Products